1999/03/11

		ComOS 3.8.3piafs Release Note for PortMaster 3


The new Lucent Technologies ComOS(R) 3.8.3piafs software is now
released for the PortMaster(R) 3 Integrated Access Server.
This release is provided at no charge to all Lucent customers.

This release note documents commands and features added between
ComOS 3.8.2 and ComOS 3.8.3piafs on the PortMaster 3.

Do NOT upgrade to this release if you are not using PIAFS cards.

This release note applies only to the PortMaster 3.


_______________ New Feature

ComOS 3.8.3piafs supports the Personal Handyphone System (PHS) or PHS
Internet Access Forum Standard (PIAFS). PIAFS is a form of wireless
ISDN commonly used in Japan. This release supports 32Kbps connection
speeds. This release does not support 64Kbps over PIAFS or V.42bis over
PIAFS.

You must use PIAFS modem cards (MCM-PM3-10, PortMaster 3 10-port Mobile
Communications Card) in your PortMaster 3 to accept PIAFS calls.

This release adds support for the PIAFS Port-Type (6) in RADIUS. Add
the following line to your RADIUS dictionary, then kill and restart
your radiusd server.

VALUE           NAS-Port-Type           PIAFS                   6


_______________ Upgrade Limitation

There have been reports that following certain upgrade paths while
running Microsoft Windows 95 clients running Japanese ver 950A
sometimes results in a Windows "blue screen" crash. Windows 98, 
Windows NT, and newer versions of Windows 95 have not displayed this
behavior.

If this problem occurs, report the problem to Lucent Japan.
Reformatting the PortMaster 3 flash memory, netbooting, and
reconfiguring the PortMaster 3 reportedly fixes the problem.


_______________ Upgrade Instructions

You can upgrade your PortMaster 3 using PMVision 1.3, pmupgrade 4.0
from PMTools, or the older programs pminstall 3.5.3, PMconsole 3.5.3,
or PMconsole for Windows 3.5.1.4, or later releases. You can also
upgrade using TFTP with the "tftp get comos" command from the
PortMaster command line interface.

*** CAUTION!  If the upgrade fails, do NOT reboot!  Contact 
*** Lucent Remote Access Technical Support without rebooting. 	    

The upgrade process on the PortMaster 3 erases the configuration area
from nonvolatile memory and saves the current configuration into
nonvolatile memory. Never interrupt the upgrade process, or loss of
configuration information can result. This upgrade does not otherwise
affect your stored configuration in the PortMaster 3.

The installation software can be retrieved by FTP from
ftp://ftp.livingston.com/pub/le/software/ and the upgrade image can be
found at ftp://ftp.livingston.com/pub/le/upgrades:

ComOS		Upgrade Image	Product
_________	_____________	_____________________________________
3.8.3piafs	pm3_3.8.3 	PortMaster 3

________________________________________________________________________

	Copyright and Trademarks

Copyright 1999 Lucent Technologies. All rights reserved.

PortMaster, ComOS, and ChoiceNet are registered trademarks of Lucent
Technologies, Inc. RADIUS ABM, PMVision, IRX, and PortAuthority are
trademarks of Lucent Technologies, Inc. All other marks are the
property of their respective owners.

	Notices

Lucent Technologies, Inc. makes no representations or warranties with
respect to the contents or use of this publication, and specifically
disclaims any express or implied warranties of merchantability or
fitness for any particular purpose. Further, Lucent Technologies, Inc.
reserves the right to revise this publication and to make changes to
its content, any time, without obligation to notify any person or
entity of such revisions or changes.

	Contacting Lucent Remote Access Technical Support

Support for PIAFS is being provided by Lucent Japan. Support includes
configuration and troubleshooting. Please call +81-3-5561-3200 for
support.

