| LED Name |
LED color |
Description |
| Locate LED and button |
| White |
Enables you to identify a particular server. The LED is controlled
using one of the following methods:
Issuing the setlocator on or off command
Using the Solaris OS command: locator -n (to turn on) or -f
(to turn off).
This LED provides the following indications:
Off - Normal operating state.
Fast Blink - The server received a signal as a result of one of the
preceding methods and is indicating here I am - and that it is
operational.
|
| Service indicator LED |
Amber |
The service required LED will illuminate when any of the following
conditions occur:
A fault is detected by the system diagnostics, such as POST
When a FRU fails, such as a power supply
When a fault is detected, a fault message is generated and sent to the service
processor (SMDC card) if installed.
|
| Power OK LED |
Off |
The system is unavailable. System power might be off or simply
disconnected. |
| Green - Steady On |
Normal Operating State |
| Green - Slow Blink |
Indicates that the system is in SUSPEND mode. |
| Power on/off Button |
Turns the system on and off. This button is recessed
to prevent accidental server power-off. There is no Power On/Off button
on the rear panel. |
