SPARCstation Voyager
| 501-2405 |
501-2493 |
501-2581 |
501-2685 |
| 60MHz 16MB |
60MHz 16MB |
60MHz 16MB |
60MHz 16MB |
Jumper Settings
| JUMPER |
PINS |
SETTING |
DESCRIPTION |
| J0600 |
1-2 |
Out |
Audio A/B (not a selection) |
J1400
J1401
J1400
J1401 |
1-2
1-2
2-3
2-3 |
In
In
In*
In |
100 Ohm ISDN termination enabled
100 Ohm ISDN termination enabled
100 Ohm ISDN termination disabled
100 Ohm ISDN termination disabled |
| J1801 |
1-2 |
N/A |
Ground test Point |
| J1802 |
1-2 |
N/A |
Ground test point |
| J1803 |
1-2 |
N/A |
Ground test point |
| J1804 |
1-2 |
N/A
|
Ground test point |
| J1805 |
1-2 |
N/A |
Ground test point |
| J1806 |
1-2 |
N/A |
Ground test point |
| J1807 |
1-2 |
N/A |
Ground test point |
| J1808 |
1-2 |
N/A |
Ground test point |
| J1809 |
1-2 |
Out |
Ground POK |
Notes
- The minimum operating system is Solaris 2.3 Edition II.
- Solaris 2.3 Edition II requires the Solaris 2.3 Edition II PSR.
- Install expansion memory in either memory slot.
- Serial Port A is configured for RS-232.
- The early production chassis is not compatible with CPU 501-2581 or
501-2685. Remove the metal standoff on the chassis located next to the CPU
memory expansion slots.
Reference
 SPARCstation Voyager Documentation.
|
