***** Release note on version 2.10V for MT5634HD16
Who: TQT
Date: 09/20/2000
Cksum: A164

Lucent's changes:
1. Using 120899 release.


Multitech's changes:
1. Added command "ATFR" to allow user to adjust fax receive level.
         ATFR=x     // to set fax Rx level dbm.  The range of x is (30 <= x <= 46)
         ATFR?      // to querry current value.  Default = 43dbm (assume minus)
         
2. Added command "AT$Q" to allow enable/disable "QUICK_CONNECT" mode.  Use S37 to 
   select the speed to connect at.  Quick connect function is only effective in speeds below
   V.34.
         AT$Q1		// enable quick connect mode.
         AT$Q0 	        // disable quick connect mode. (default)
         
3. Modified G(dp_count) flag to prevent "CONNECT" msg from being display when modem retrain
   due to LAPM errors.

4. Added "modem_ring" backplane packet command to allow controller to tell modem that
   it is an analog modem ring.

5. Fixed V.110 Tx delay problem.  A noticeable delay (1 second) in data transmission was
   occurred in V.110 connections.  This was due to Tx buffer was filled with "idle frames"

6. Added R2MF code for E1.