V.34 Fax Server Appliances

Multi-Tech FaxFinder Fax Server

Models FF130, FF230, FF430, FF830

Contents

• Introduction
• FaxFinder Components
• Update
• Revision History
• Support Options
• Copyrights and Trademarks

Introduction

The FaxFinder^® Fax Server system is a turnkey solution that can send and receive faxes via analog telephone lines (POTS lines, PBX extension, etc). The FaxFinder solution provides convenient and secure distributed faxing capabilities, with a high degree of privacy and reliability for both the sender and recipient.

To distribute received faxes dynamically, connect the ports of  the FaxFinder to PBX ports that are capable of converting Telco provided DID information to DTMF digits. The FaxFinder (after receiving the fax) converts the fax to a PDF or TIFF file, and then uses the DTMF digits to determine where to email the received fax.  Received faxes can also be printed and/or copied to a network share.

The FaxFinder Client software allows you to send any document that can be printed from Windows, as a fax. Faxes can also be sent via our "Send Fax" WEB interface menu, via T.37 Email to Fax, and by API access.

FaxFinder Data Sheet

Contents

FaxFinder Components

The FaxFinder system consists of three upgradeable parts; the FaxFinder Client software, the FaxFinder Server firmware and the MT5634SMI-V92 modem firmware internal to the FaxFinder Server.

1. The FaxFinder Client software runs on a user’s Windows 7 / Vista / XP / 2000 workstation (32 bit and 64 bit versions of the client are available). The FaxFinder Terminal Services Client software runs on Windows 2003 and Windows 2008 servers running Terminal Services (32 bit and 64 bit versions are available).
2. The FaxFinder Server firmware, implementing the server functionality of the Fax Finder appliance.
3. The Modem firmware, implementing the fax machine to fax machine communication over the telephone line.

• The FF130 has one MT5634SMI-V92 modem module.
• The FF230 has two MT5634SMI-V92 modem modules.
• The FF430 has four MT5634SMI-V92 modem modules.
• The FF830 has eight MT5634SMI-V92 modem modules.

Contents

Update

• Modem Firmware
• FaxFinder Server Firmware
• FaxFinder Client Software
• Save the FaxFinder Configuration File

To update the modem firmware, use the Update mechanism from the Web page of the FaxFinder Server.

1. Open the web page to the FaxFinder FFx30 Fax Server. 
2. Select the System Configuration Menu.
3. Select the Firmware menu (left side menu).
4. Select the modem(s) you wish to update using the update check box.
   
5. Browse to the modem firmware file to use to update the modem(s). The modem module firmware is of the form: DWccnnnn.hex. The cc is for the country code, and nnnn is for the version number. 
6. Select the "update" button to begin the modem update.

To update the FaxFinder Server firmware: 

1. Save the Server Configuration File as detailed below.
2. Open the web page to the FaxFinder FFx30 Fax Server. 
3. Select the System Configuration Menu.
4. Select the Firmware menu (left side menu).
   
5. Browse to the Firmware file for the Upload Firmware edit field.  The file name will be ffupdate_XXXX_n_nn where XXXX is the model (FF130, FF230, etc.) the firmware is for.  n_nn is the version of the firmware.
6. Browse to the MD5 checksum file associated with the firmware file you want to upload.  The file name will be ffupdate_XXXX_n_nn.md5 where XXXX is the model (FF130, FF230, etc.) the firmware is for.  n_nn is the version of the firmware.
7. Click the update button.
8. The process of uploading the firmware will take several (5 to 7) minutes. 
9. When it is done, you may reload the web page, and login to check the firmware version.

To update the FaxFinder Client software:

1. Quit the FaxFinder client software.
2. It is best to uninstall the previous version via Add/Remove Programs in the Control Panel.
   
3. Run the ffclient-x_x_x.msi (where x-xx is the latest version) by double clicking on it..
4. Or Run ffclientts-x_x_x.exe for the Terminal Services Version of the FaxFinder Client. 
5. Follow the on screen instructions to complete the update. 

To save the Server Configuration File:

1. Web to the FaxFinder Server.
2. Select the Save/Restore tab.
3. You will be prompted for a location to save the configuration file.

Contents

Revision History

FFx30 Version 2.0.4 -----------------------------------------------------------------

• This is a maintenance release of the FFx30 Server Firmware.

New Features and Changes

• SMTP config page warns if the smtp server name can't be resolved.
• Added option to add an inbound route when adding a user.
• Added Mail Log page which shows recent mail delivery attempts.
• Added link to Mail Queue page to force resend of queued mail.
• Added outbound option to allow simultaneous faxing to the same number.
• Added modem firmware filename checking to prevent flashing with wrong code.
• Added option to change the email address used for sending mail.
• Separated the "send test email" feature from SMTP settings on the SMTP config page. Also made test message sent message more accurate with link to Mail Log page.
• Added link to Scribus-format cover pages for direct editing.

Bug Fixes

• Modem Log page now displays time that the entry was logged rather than modem off hook time.
• Improved fax sending reliability when sending and receiving numerous large faxes simultaneously.
• Make User CSV import compatible with files edited by Excel.
• Fixed CSV import bug with contact names containing an apostrophe character.
• Fixed importing of contact phone numbers when using "merge" option.
• Fixed resolution for incoming faxes that wrongly specify vertical resolution in english units instead of metric.
• Modems are no longer hard reset between fax calls. Helps with problems arising from the modem being on-hook while it is resetting and a call comes in during reset.
• Fixed problem printing to some Gutenprint printers (Printer status page shows "/usr/local/lib/cups/filter/pstoraster failed").
• Increased field length for modem init string to 79 chars (was 15).
• Increased length of custom time server field.
• Modem config page keeps same modem selected after saving changes.
• Fix for User Defined routing to only accept Max Extension digits when ? is used.
• Renamed "Max DTMF digits" to "Max Extension digits".
• New ajax share browser that allows browsing shares with many directories.
• Fixes issues when adding an inbound destination on a unit that has a large share connected.
• Added version check for cover pages (PDF 1.4 required).
• Force pop-up windows to the front when they change (help, details links, etc).
• Check for matching passwords with javascript so users don't have to reenter information.
• Added javascript email validation for SMTP config page and User email address so users don't have to reenter information.
• Make sure recipient fields get cleared on Send Fax page when user has no contacts, otherwise the recipient is duplicated.

Known Problems

• If the DNS settings are changed, the unit should be rebooted.  Otherwise, some processes don't recognize the change.  This affects time server synchronization and checking for a valid hostname when changing the SMTP server.

FFx30 Version 2.0 -----------------------------------------------------------------

            This is the first release of the FFx30 Server Firmware.

Contents

Support Options

Contacting Multi-Tech Support

In order to better serve our customers, manage support requests and shorten resolution times, we have created the online web portal allowing you to submit questions regarding Multi-Tech products directly to our technical support team. Get answers to your most complex questions, ranging from implementation, troubleshooting, product configuration, firmware upgrades and much more. Support case requests are monitored from 8:00 am to 5:00 pm CT, Monday through Friday (except holidays), and are handled in the order they are received.

Online Web Portal

Create an account and submit a case, or view your existing cases on the Support Portal.

Knowledge Base

The Knowledge Base provides immediate answers to your questions and gives you access to support resolutions for all Multi-Tech products. Search the Knowledge Base

Technical Support

Visit our main Support page for all of our support services: Technical Support
Access our: FTP Site

Your Location: By Email, By Phone

Europe, Middle East, Africa: support@multitech.co.uk +(44) 118 959 7774

U.S., Canada, all others: support@multitech.com (800) 972-2439 or (763) 717-5863

Contents

Copyrights and Trademarks

All documents and software provided herewith are Copyright (c) 2009 Multi-Tech Systems. All rights reserved.  MS, Windows, Windows 95, Windows NT are trade names of Microsoft Corporation.  Other trademarks or trade names used herein are properties of the respective owners.

Contents