**************************************************************** * MT9234SMI 1.02u Firmware Release Notes * **************************************************************** Contents: 1) Models Covered By This Firmware. 2) Firmware History. 3) Support Information. **************************************************** * 1 ** Models Covered By This Firmware * **************************************************** - MT9234SMI - ISI9234PCIE/x - FFx30 (w/9234) **************************************************** * 2 ** Firmware History * **************************************************** -------------------------------------------------- Firmware Version 1.02u -------------------------------------------------- (a) Bugs fixed since 1.02o: * 12/18/2009 - Default DAA so RING detect works if ringing while power up occurs. * 02/09/2010 - Tweak $P code to disable PNP more effectively. * 07/16/2010 - Fix callback security issue where a call back fails on first attempt. Previously it would fail first callback attempt but work on the second attempt. * 09/10/2010 - Tweak CID detection to work on a double RING. * 12/03/2010 - Fix connecting issue in V.22bis where there was a long Round Trip Delay. * 01/03/2011 - Fix code to now send BREAK in data mode. * 06/24/2011 - Fix AT lock up after E0 E1 data string. * 07/08/2011 - Fix missing +FCO in fax if AT&F was not issued. * 08/03/2011 - Fax fix to not allow data format of 2. * 02/16/2012 - Fix code so a double +VLS=1 in voice TAM mode is allowed. * 07/18/2012 - Add better flow control operation when software drops RTS. (b) Features Added/Removed/Modified since 1.02o: * 08/05/2010 - Enable flow control in callback Security on CONNECT message instead of "Password>" prompt. This feature added. * 08/25/2010 - Allow +VGT/+VGR values to control gain on +VTX/+VRX in +VLS=0/1 mode. This feature added. * 09/30/2010 - Character abort disabled when %S1 and not 115200. This feature added. * 11/30/20120 - Allow +VGT/+VGR values between 0 and 62 to turn AGC off and control gain. This feature added. * 03/05/2012 - Add 50 mS delay before CSI in class 2.x when in V.17. This feature added. * 07/06/2012 - Add code to display +FHS:A4, A5 or A6 instead of A0 based on hang up. This feature added. * 07/06/2012 - Add code to allow no DCN after EOP and MCF to return +FHS:0. This feature added. (c) Test/Debug Features Added/Removed/Modified since 1.02o: * None. (d) Known issues in this version: * 06/24/2011 - When data string starting with E0 E1 is sent to modem, AT detect comes back, but only at the serial speed the data was sent back. Autobaud is lost and a power cycle or call in and answer is required to clear condition. **************************************************** * 3 ** Support Information * **************************************************** Multi-Tech provides free technical support for your product. To obtain this support, use one of the following contact options: - For faster service, we suggest you create a support case on our Support Portal at: https://support.multitech.com U.S. & Canada number: 763-717-5863 Answered Monday - Friday 8:00 am to 5:00 pm Central Time (Daylight Savings observed when in effect) International number: +763-717-5863 Answered Monday - Friday 8:00 am to 5:00 pm Central Time (Daylight savings observed when in effect) EMEA support@multitech.co.uk +(44) 118 959 7774 U.S. support@multitech.com 800-972-2439 or (and Rest of World) +763-717-5863 Replacement Parts and Accessories For replacement parts and accessories, contact Multi-Tech at: (888) 288-5470, option 3 or +1 (763) 785-3500 US Mail Address: Multi-Tech Systems, Inc. 2205 Woodale Drive Mounds View, MN 55112 USA ::Form Version R2011-11-02::