Installation instructions for MultiVOIP mvp130-AV and mvp130-av-fxs software vs 2.06.D4 

   <Caution> 

   MultiVOIP's
   Uninstall Solution 
   Product Update
   PN: 82010180 Rev. A
   02/16/04

   Before uninstalling any old versions of MultiVOIP software,
   install the new MultiVOIP Software provided for this readme.

1. Run Avaya130_2.06.D4.exe to unzip the install files. The install
   files will be unzipped to the directory C:\Avaya130_206D4.

2. Go to the folder C:\Avaya130_206D4\disk1 and run setup.exe to
   install the software to the pc. Accept the default installation folder and program
   group name. When prompted, select the comm. port that you will use with 
   the MultiVOIP. Click "No" when asked if you would like to run configuration.

3. Connect the MVP130-AV to the PC comm. port and power it on.
   When the boot light is off, go to step 4. 
   
   Notice: the boot light will be on solid, then start to blink, then go out completely
   as you power on the voip.

4. Run Start->Programs->MultiVOIP 2.06->Configuration and configure the MultiVOIP
   for your application.

5. Uninstall your old version of MultiVOIP software by selecting the "Uninstall" option
   from the program group. 

Note: You will be able to manage and configure the voip with WEB interface
      using a Java plug in for the browser. 

Changes in MVP210/410/810-AV release 2.06.d4

1. Fixed the problem where SuperG3 fax machines attached to the MultiVOIP could not receive faxes.

Upgrade procedures:

1. Upgrade from 2.06.xx to 2.06.D4 using GUI

Steps	Description
1       Install 2.06 software
2       Run 'Upgrade Software'
3       A dialog box appears. Select 'Retain configuration' to retain the current configuration
        or select 'Use factory defaults' to load the factory defaults.
4       On successful completion of upgrade, the box is completely upgraded with 2.06.
5.      Uninstall your old version of MultiVOIP software by selecting the "Uninstall" option
        from the program group. 
6.      The upgrade is complete.

Note: You will be able to manage and configure the voip with WEB interface
      using a Java plug in for the browser. 


2. Upgrade from 2.06.xx to 2.06.D4 using FTP (Remote Upgrade)

Steps	Description
1	Install 2.06 software
2	Use an Passive FTP client (supported by IE) and DOS FTP client.
3	Initiate a FTP session to box running 2.06.xx.
4	Send mvpt1ftp.bin to the box.
5	On completion of ftp session, the box is completely upgraded with 2.06.d4
6.      Uninstall your old version of MultiVOIP software by selecting the "Uninstall" option
        from the program group. 
7.      The upgrade is complete.

Note: You will be able to manage and configure the voip with WEB interface
using a Java plug in for the browser. You can retrieve vs. 1.4.02.01 from 
our ftp server at ftp://ftp.multitech.com/MultiVoip/Misc/java/j2re-1_4_2_01/
After installing, reboot your PC.