Installation instructions for MultiVOIP 210-ss/410-ss/810-ss software vs 3.11

   <Caution> 

   MultiVOIP's
   Uninstall Solution 
   Product Update
   PN: 82010180 Rev. A
   02/16/04

   Before uninstalling any old versions of MultiVOIP software,
   install the new MultiVOIP Software provided for this readme.

1. Run "MultiVOIP configuration" from your old version of MultiVOIP
   software and take note of the current settings. 

2. Unzip mvp3.11.2C.zip to the directory C:\mvp3112C on the PC.

3. Go to the folder C:\MVP3112C\disk1 and run setup.exe to install the 
   software to the pc. Accept the default installation folder and program
   group name. When prompted, select the comm. port that you will use with 
   the MultiVOIP.  Click "No" when asked if you would like to run
   configuration.

4. Connect the MVP210-ss/410-ss/810-ss to the PC comm. port and power it on.
   When the boot light is off, go to step 5.

5. Run Start->Programs->MultiVOIP 3.11->Upgrade Software.
   The voip will respond with "upgrade will reboot the multivoip" Click OK.
   Next you will be prompted with a choice to retain the current settings
   or download factory defaults.  Select the appropriate option and then
   click OK.  The firmware will take a few minutes to load.  When the
   boot light goes out, the firmware loading has finished.

6. Run Start->Programs->MultiVOIP 3.11->Configuration and
   configure the MultiVOIP for your application.  If you chose retain 
   current settings in step 5, you should only have to review your settings. 

7. Uninstall your old version of MultiVOIP software by selecting the
   "Uninstall" option from the program group. 

8. The upgrade is complete.

FTP upgrade instructions.

1. Determine the version of firmware which is currently running on your MultiVoIP. 
    This can be obtained by looking under configuration/system information, via the GUI or WEB/Java. 

2a. ftp the file "mvpt1ftp.bin" from C:\Program Files\Multi-Tech Systems\MultiVOIP 3.11
2b. WEB/Java to the MultiVoIP and check configuration/system information and confirm firmware version as 3.11.2c. 

Warning: FTP firmware upgrade may ID as 3.08.2c until you download factory defaults.

Note: You will be able to manage and configure the voip with WEB interface
using a Java plug in for the browser. You can retrieve vs. 6 update 13 from 
our ftp server at ftp://ftp.multitech.com/MultiVoip/Misc/java/jre-6u13/
After installing, reboot your PC.