Installation instructions for MultiVOIP TA410/TA810 software vs 10.08.OG

   <Caution> 

   MultiVOIP's
   Uninstall Solution 
   Product Update
   PN: 82010180 Rev. A
   02/16/04

   Before uninstalling any old versions of MultiVOIP software,
   install the new MultiVOIP Software provided for this readme.

1. Run "MultiVOIP configuration" from your old version of MultiVOIP
   software and take note of the current settings. 

2. Run ta1008og.exe to unzip the install files. The install files will be
   unzipped to the directory C:\ta1008og

3. Go to the folder C:\ta1008og\disk1 and run setup.exe to install the 
   software to the pc. Accept the default installation folder and program
   group name. When prompted, select the comm. port that you will use with 
   the MultiVOIP.  Click "No" when asked if you would like to run
   configuration.

4. Connect the TA410/TA810 to the PC comm. port and power it on.
   When the boot light is off, go to step 5.

5. Run Start->Programs->TalkAnytime 10.08->Configuration and
   configure the MultiVOIP for your application.  

Note: You will be able to manage and configure the voip with WEB interface
using a Java plug in for the browser. You can retrieve vs. 1.4.02.01 from 
our ftp server at ftp://ftp.multitech.com/MultiVoip/Misc/java/j2re-1_4_2_01/
After installing, reboot your PC.