****************************************************************
* Connection Manager Software Release Notes                    *
****************************************************************
Contents:
1) Models Covered By This Software
2) Software Support
3) Support Information


****************************************************
* 1 **    Models Covered By This Firmware/Software *
****************************************************

MTC-H5-B01
MTC-H5-B03
MTC-LAT1-B01
MTC-LAT1-B02
MTC-LAT1-B03
MTC-LNA4-B01
MTC-LNA4-B03
MTC-LVW2-B01
MTC-LVW2-B02
MTC-LVW2-B03
MTC-MAT1-B03
MTC-MAT1-B01
MTC-MVW1-B01
MTC-MVW1-B03

MTCM-LAT3-B03
MTCM-LSP3-B03

MTD-H5
MTD-MAT1
MTD-MVW1

MTQ-H5-B01
MTQ-H5-B02
MTQ-LAT3-B01
MTQ-LAT3-B02
MTQ-LVW3-B02
MTQ-LVW3-B01

MTSMC-H5
MTSMC-H5-U
MTSMC-LAT1
MTSMC-LAT1-U
MTSMC-LAT3
MTSMC-LAT3-U
MTSMC-LEU1
MTSMC-LEU1-U
MTSMC-LSP3
MTSMC-LSP3-U
MTSMC-LVW2
MTSMC-LVW2-U
MTSMC-LVW3
MTSMC-LVW3-U
MTSMC-MAT1
MTSMC-MAT1-U
MTSMC-MVW1
MTSMC-MVW1-U

MT100UCC-H5

****************************************************
* 2 **    Software Support                         *
****************************************************
---------------------------------------------------------
Software Name     		   - Version    - Date
connectionmanager-1.0.6.49.msi  - 1.0.6.49   - 09/26/2018

Software available for download from same location as these 
release notes or in the repository: 
https://gitlab.multitech.net/multitech/connection-manager/commits/gl_1.0.7
---------------------------------------------------------

(a) Windows Versions Supported 
* Both 32-bit and 64-bit versions of Windows 7, 8 and 10
* In the case of Serial Modems, the Connection Manager requires a modem be installed in the Operating System and to be linked to the correct 
serial port.


(b) Changes since last release V1.0.6.30
* Connection Manager Installer - Updated Telit Drivers
New Telit drivers have been added to the installation package:
  - Telit_Windows_10_WHQL_Drivers_Installer_UF.20.03_2.02.0003_win10.zip
  - Telit_Windows7_8_Desktop_Drivers_Installer_UF.00.07_1.06.0011.zip 
Connection Manager Installer provides an option that allows installing the modem drivers (the option is enabled by default). User can skip modem drivers installation.
 
The Telit Drivers are installed in a separate installation process after the MultiTech Connection Manager Installation is completed. 
 
The Telit drivers are not removed from the operating system when Connection Manager is uninstalled. 

* Migration to QT 5.11: The previous version of Connection Manager 1.0.6.30 was based on the QT version 5.1.0 which: 
  - Did not support Windows 10
  - Contained an issue that affects COM interfaces detection in the
    Windows OS and did not allow it to work with Serial modems.
After the migration to QT 5.11, the new release of Connection Manager supports Windows 7,8,10 and supports Serial modem detection.

* Version QT 5.11 is used in the new Connection Manager release. The installation package was modified to support the installation of new Windows 10 drivers. The MultiTech Connection Manager installer contains an additional step that disables the Windows 10 native connection manager during the installation process, and enables it during uninstallation. 
 
* An APN field has been added to the Connection Manager configuration screen. Connection Manager sends the AT+CGDCONT command only when a APN value is set by user. When APN is empty, Connection Manager does not send AT+CGDCONT command. 
  
* Fixed an issue where serial H5 modems wont dial in Windows 7. An additional initialization command AT+COPS=0 has been added so the sequence no longer causes connection problems. 

* Fixed an issue where IMEI value on H5 modem is not displayed properly. A separate command was added to retrieve the IMEI for H5 modems: AT+CGSN

* Fixed an issue where 4G/LTE modems could not register in cellular network.  To register 4G/LTE modems an AT command AT+CGREG is now used based on the LE910 chip set on the cellular network.

(c) Known Issues
* May have issues communicating with device through connection manager after operating system come out of sleep/suspend mode.  May need to unplug device and plug back in.


****************************************************
* 3 **    Support Information                      *
****************************************************
For technical support and information, please visit our web sites.

Create a support ticket at MultiTech's Product Support Portal:
https://support.multitech.com  

Look up developer information, downloads, and engage in community forums for MultiTech's products:
http://www.multitech.net/developer/

Look up product information, manuals, downloads, and ordering information on MultiTech's corporate web site:
https://www.multitech.com/



If you do not have internet access, please call or email.

U.S. & Canada and International: +763-717-5863 or 800-972-2439(US only)
8:00 am to 5:00 pm Central Time (Answered Monday  Friday)
(Daylight savings observed when in effect)

Email (USA): support@multitech.com           
Email EMEA : support@multitech.co.uk  

EMEA sales office phone: +(44) 118 959 7774

Replacement Parts and Accessories
MultiTech Repair:
(888) 288-5470, option 3
       Or 
Call our main number: +1(763)785-3500


US Mail Address:
  Multi-Tech Systems, Inc.
  2205 Woodale Drive
  Mounds View, MN 55112
  USA

::Form Version R2017-11-14::
